Ultra Start 33xx Series Installationsanleitung PDF herunterladen (Seite 9)

Wiring Descriptions

Pin Function Description

9-GREEN/ Hood Pin(-) - Input to detect ground when hood is open.

WHITE MUST BE CONNECTED.

10-GREEN Door Pin(-) - Input to detect (-) when door is open. (“M” series)

11-BLACK Ground(-) - System chassis ground input.

12-PINK Brake Light (+) - Positive brake light switch input. Used to detect

the brake switch being applied.

13-BLUE/ Tach(A/C) - A/C Tach signal input. Used to detect engine speed to

WHITE indicate vehicle is running.

(Coil, Injector, cam/crank position sensors)

14-BLUE Diesel(+/-) - Programmable Wait to Start Input. Detects 12v or

negative signals. (Menu 3)

LOCK/ UNLOCK CONNECTOR (3pin red)

Pin Function Description

1-GREEN Lock(-) - Programmable LOCK output. (Menu 1)

2-RED 12volts - 250ma 12volt output for relays.

3-BLUE Unlock(-) - Programmable UNLOCK output. (Menu 1)

ANTENNA CONNECTOR (4pin Blue)

RF Antenna with Program Button and LEDs

TEMP SENSOR or INSTANT START CONNECTOR (2pin white)*

Connector for Instant Start or Temperature Sensor inputs.

AUXILIARY CONNECTOR (3pin white)*

Pin Function Description

1-WHITE/ Ground While Running(-) - 250ma ground output while

VIOLET remote starter is active.

2-BLACK Ground(-) - 250ma ground output.

3-RED 12volts(+) - 250ma 12volt output.

*13xx Series Only

REMOTE VEHICLE STARTER INSTALL MANUAL

PAGE 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Keine Kommentare

Ultra Start 33xx Series Installationsanleitung Seite 9